CHINESE
Shenzhen ADD Tech Co., Ltd
LED Display Installation Steps
1. Assemble the cabinets on the structure.
2. Connect the UTP cables between cabinets.
3. Connect the AC cables between cabinets.
4. Install Sending Card.
5. Connect the DVI cable between Sending Card and Graphic Card.
6. Connect the COM cable between Sending card and computer.
7. Connect the UTP cables between Sending Card and Receiving Card.
8. Turn on control computer.
9. Install LED studio software (see attached CD and serial number is 888888)
10. Turn on LED display.
11. Set the display mode in “clone mode” in the window of Graphic Card properties.
12. Use the LED studio to control the display.
